[求助]：我自己定制图像块菜单为什么不显示图像呢？

jeepsheep

我自己定制图像块菜单为什么不显示图像呢？但是还能插入块！
我附上我自己写的.mus，请高手帮我看看那错了！


//
//      AutoCAD menu file -
//

***MENUGROUP=YJP

***POP1
**YJP
               [&YJP]
               [->Block]
                 [3D]^C^C$I=YJP.3D $i=*
                 [CEIL]^C^C$I=YJP.CEIL $i=*
                 [ELECT]^C^C$I=YJP.ELECT $i=*
                 [EQUIP]^C^C$I=YJP.EQUIP $i=*
                 [FURN]^C^C$I=YJP.FURN $i=*
                 [MARK]^C^C$I=YJP.MARK $i=*
                 [PLANTS]^C^C$I=YJP.PLANTS $i=*
                 [<-SANITARY]^C^C$I=YJP.SANITARY $i=*
              
***TOOLBARS

***IMAGE
**3D
[3D]
[3D(3D-CH1)]^C^C-insert 3D-CH1
[3D(3D-CT)]^C^C-insert 3D-CT
[3D(3D-SF1)]^C^C-insert 3D-SF1
[3D(3D-SF2)]^C^C-insert 3D-SF2

**CEIL
[CEIL]
[CEIL(C-DL)]^C^C-insert C-DL
[CEIL(C-FT)]^C^C-insert C-FT
[CEIL(C-LDL)]^C^C-insert C-LDL
[CEIL(C-LEV)]^C^C-insert C-LEV
[CEIL(C-LS1W)]^C^C-insert C-LS1W
[CEIL(C-LS2W)]^C^C-insert C-LS2W
[CEIL(C-LS3W)]^C^C-insert C-LS3W
[CEIL(C-LS4W)]^C^C-insert C-LS4W
[CEIL(C-LSL)]^C^C-insert C-LSL
[CEIL(C-WL)]^C^C-insert C-WL

**ELECT
[ELECT]
[ELECT(E-BELL)]^C^C-insert E-BELL
[ELECT(E-DB)]^C^C-insert E-DB
[ELECT(E-DF)]^C^C-insert E-DF
[ELECT(E-DSB)]^C^C-insert E-DSB
[ELECT(E-DSF)]^C^C-insert E-DSF
[ELECT(E-DSW)]^C^C-insert E-DSW
[ELECT(E-DW)]^C^C-insert E-DW
[ELECT(E-FB)]^C^C-insert E-FB
[ELECT(E-FF)]^C^C-insert E-FF
[ELECT(E-FW)]^C^C-insert E-FW
[ELECT(E-KEY)]^C^C-insert E-KEY
[ELECT(E-MFB)]^C^C-insert E-MFB
[ELECT(E-RB)]^C^C-insert E-RB
[ELECT(E-SB)]^C^C-insert E-SB
[ELECT(E-SF)]^C^C-insert E-SF
[ELECT(E-SW)]^C^C-insert E-SW
[ELECT(E-TB)]^C^C-insert E-TB
[ELECT(E-TF)]^C^C-insert E-TF
[ELECT(E-TVB)]^C^C-insert E-TVB
[ELECT(E-TVW)]^C^C-insert E-TVW
[ELECT(E-TW)]^C^C-insert E-TW

**EQUIP
[EQUIP]
[EQUIP(EQ-1)]^C^C-insert EQ-1
[EQUIP(EQ-1K)]^C^C-insert EQ-1K
[EQUIP(EQ-2)]^C^C-insert EQ-2
[EQUIP(EQ-3)]^C^C-insert EQ-3
[EQUIP(EQ-4)]^C^C-insert EQ-4
[EQUIP(EQ-5)]^C^C-insert EQ-5
[EQUIP(EQ-6)]^C^C-insert EQ-6
[EQUIP(EQ-7)]^C^C-insert EQ-7
[EQUIP(EQ-7E)]^C^C-insert EQ-7E
[EQUIP(EQ-8)]^C^C-insert EQ-8
[EQUIP(EQ-9)]^C^C-insert EQ-9

**FURN
[FURN]
[FURN(F-CH1)]^C^C-insert F-CH1
[FURN(F-CH2)]^C^C-insert F-CH2
[FURN(F-CH3)]^C^C-insert F-CH3
[FURN(F-CH4)]^C^C-insert F-CH4
[FURN(F-CH5)]^C^C-insert F-CH5
[FURN(F-CH6)]^C^C-insert F-CH6
[FURN(F-CH7)]^C^C-insert F-CH7
[FURN(F-CH8)]^C^C-insert F-CH8
[FURN(F-SF1)]^C^C-insert F-SF1
[FURN(F-SF10)]^C^C-insert F-SF10
[FURN(F-SF11)]^C^C-insert F-SF11
[FURN(F-SF12)]^C^C-insert F-SF12
[FURN(F-SF2)]^C^C-insert F-SF2
[FURN(F-SF3)]^C^C-insert F-SF3
[FURN(F-SF4)]^C^C-insert F-SF4
[FURN(F-SF5)]^C^C-insert F-SF5
[FURN(F-SF6)]^C^C-insert F-SF6
[FURN(F-SF7)]^C^C-insert F-SF7
[FURN(F-SF8)]^C^C-insert F-SF8
[FURN(F-SF9)]^C^C-insert F-SF9

**MARK
[MARK]
[Tony]^C^C-insert Tony
[MARK(D-DM)]^C^C-insert D-DM
[MARK(D-ED)]^C^C-insert D-ED
[MARK(D-EL)]^C^C-insert D-EL
[MARK(D-ER)]^C^C-insert D-ER
[MARK(D-EU)]^C^C-insert D-EU
[MARK(D-FFM)]^C^C-insert D-FFM
[MARK(D-FFMA)]^C^C-insert D-FFMA
[MARK(D-FLEV)]^C^C-insert D-FLEV
[MARK(D-FMA)]^C^C-insert D-FMA
[MARK(D-JM)]^C^C-insert D-JM
[MARK(D-LEV)]^C^C-insert D-LEV
[MARK(D-WFM)]^C^C-insert D-WFM
[MARK(D-WFMD)]^C^C-insert D-WFMD
[MARK(D-WFML)]^C^C-insert D-WFML
[MARK(D-WFMR)]^C^C-insert D-WFMR
[MARK(D-WFMU)]^C^C-insert D-WFMU
[MARK(D-WIN)]^C^C-insert D-WIN
[MARK(RM)]^C^C-insert RM
[MARK(S-EXIT)]^C^C-insert S-EXIT
[MARK(S-NORTH)]^C^C-insert S-NORTH

**PLANTS
[PLANTS]
[PLANTS(P1)]^C^C-insert P1
[PLANTS(P10)]^C^C-insert P10
[PLANTS(P2)]^C^C-insert P2
[PLANTS(P3)]^C^C-insert P3
[PLANTS(P4)]^C^C-insert P4
[PLANTS(P5)]^C^C-insert P5
[PLANTS(P6)]^C^C-insert P6
[PLANTS(P7)]^C^C-insert P7
[PLANTS(P8)]^C^C-insert P8
[PLANTS(P9)]^C^C-insert P9

**SANITARY
[SANITARY]
[SANITARY(SW-1)]^C^C-insert SW-1
[SANITARY(SW-10)]^C^C-insert SW-10
[SANITARY(SW-11)]^C^C-insert SW-11
[SANITARY(SW-12)]^C^C-insert SW-12
[SANITARY(SW-13)]^C^C-insert SW-13
[SANITARY(SW-14)]^C^C-insert SW-14
[SANITARY(SW-15)]^C^C-insert SW-15
[SANITARY(SW-16)]^C^C-insert SW-16
[SANITARY(SW-2)]^C^C-insert SW-2
[SANITARY(SW-3L)]^C^C-insert SW-3L
[SANITARY(SW-3R)]^C^C-insert SW-3R
[SANITARY(SW-4)]^C^C-insert SW-4
[SANITARY(SW-5)]^C^C-insert SW-5
[SANITARY(SW-6)]^C^C-insert SW-6
[SANITARY(SW-7)]^C^C-insert SW-7
[SANITARY(SW-8)]^C^C-insert SW-8
[SANITARY(SW-9)]^C^C-insert SW-9
[SANITARY(SW-E1A)]^C^C-insert SW-E1A
[SANITARY(SW-E1B)]^C^C-insert SW-E1B
[SANITARY(SW-E2A)]^C^C-insert SW-E2A
[SANITARY(SW-E2B)]^C^C-insert SW-E2B
[SANITARY(SW-E3A)]^C^C-insert SW-E3A
[SANITARY(SW-E3B)]^C^C-insert SW-E3B
[SANITARY(SW-E4)]^C^C-insert SW-E4


//
//      
//

前生

slb在不在默认的路径里?

zhynt

[3D]^C^C$I=YJP.3D $i=* 应为[3D]$I=acad.3D $i=acad.* 且前面无需加^C^C
余此类推

jeepsheep

是不是应该先做这些块的幻灯片*.sld,但是我不知如何做？

zhynt

啊？原来你没有做幻灯！看这里：

1. 
   
2. <table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="700" id="AutoNumber1" height="498">
   
3.   <tr>
   
4.     <td width="100%" height="489">
   
5.       <iframe name="I1" width="100%" height="100%" src="http://www.xdcad.net/forum/showthread.php?s=&threadid=43637">
   
6. 浏览器不支持嵌入式框架或配置为不显示嵌入式框架
   
7.       </iframe>
   
8.     </td>
   
9.   </tr>
   
10. </table>
    

复制代码

jeepsheep

我在autocad lt 2002 打开我自己写的mns,奇怪的是我什么也没改，却能看到图像块菜单的图像了！为什么？

zhynt

我想这估计跟版本有关吧，其实图标菜单可以这么写,这样比较通用：
[图标菜单]$I=tubiao $I=*
再就是可能前面slb不在路径中，而后面的正好在路径中。

jeepsheep

我都是新装的acad2002和 lt，都是直接加载我自己做的图像块菜，我也找了LT下也没有特殊的SLD或SLB,

zzz8662

jeepsheep,你的问题解决了吗？我也出现了这个问题，我是在ATUOCAD2002下做的啊。解决了，别忘了介绍一下。

happylgx

把slb路径加入support directory就可以了