[求助]：arx程序，想实现一加载就执行,如何做？

zhang8755

arx程序，想实现一加载就执行，同时还是一个命令，如何做？
比如我定义了一个命令try，我想实现加载的同时，执行一次。

baohui668

把命令放到Load app()里面
然后在CAD安装目录下的文件ACAD.RX下加入自己的ARX就OK了

arbyao

如果是用向导写的程序
可以在InitApplication()函数中写上
acedCommand(RTSTR,"try",0);
函数用法，具体的看acedCommand()说明

tigerhsiao

Please refer following statement, autorun to load arx file when Autocad begin starting.

Creating AutoCAD Subkeys and Values
The ObjectARX application’s installation program must be designed to manage
a set of keys and values for that application within the section of system
registry for each version of AutoCAD with which it is intended to run. The
following example shows the layout of the keys and values in the section of
the registry that must be created and maintained for the application:
\\HKEY_LOCAL_MACHINE\SOFTWARE\Autodesk\AutoCAD\releaseNum\
ACAD-1:LocaleID\
Applications\
ApplicationName\
LoadCtrls:REG_DWORD:acrxAppLoadReason
RegPath:REG_SZ:RegistryPathWhereLoaderIsSpecified
The releaseNum and ACAD-1:LocaleID keys are created by the AutoCAD
installation program.
The ApplicationName key must be the logical name of the application, which
is used internally by AutoCAD to identify the program.
The acrxAppLoadReason value defines the conditions under which the application
will be loaded, using one or more logical ORs of the following hex
values listed with their associated meanings:
0x01 Load the application upon detection of proxy object.
0x02 Load the application upon AutoCAD startup.
0x04 Load the application upon invocation of a command.
0x08 Load the application upon request by the user or another
application.
0x10 Do not load the application.
The RegistryPathWhereLoaderIsSpecified value must identify the registry
path for the application’s own section of the registry.
The ObjectARX API includes the acrxRegisterApp() function, which may be
used in an ObjectARX application to enter information about the application
into the AutoCAD section of the system registry. Typically,
acrxRegisterApp() would enter this information the first time the application
is loaded, and confirm the presence of that information on subsequent
loads.

tigerhsiao

Please refer following statement, autorun to load arx file when Autocad begin starting.

Creating AutoCAD Subkeys and Values
The ObjectARX application’s installation program must be designed to manage
a set of keys and values for that application within the section of system
registry for each version of AutoCAD with which it is intended to run. The
following example shows the layout of the keys and values in the section of
the registry that must be created and maintained for the application:
\\HKEY_LOCAL_MACHINE\SOFTWARE\Autodesk\AutoCAD\releaseNum\
ACAD-1:LocaleID\
Applications\
ApplicationName\
LoadCtrls:REG_DWORD:acrxAppLoadReason
RegPath:REG_SZ:RegistryPathWhereLoaderIsSpecified
The releaseNum and ACAD-1:LocaleID keys are created by the AutoCAD
installation program.
The ApplicationName key must be the logical name of the application, which
is used internally by AutoCAD to identify the program.
The acrxAppLoadReason value defines the conditions under which the application
will be loaded, using one or more logical ORs of the following hex
values listed with their associated meanings:
0x01 Load the application upon detection of proxy object.
0x02 Load the application upon AutoCAD startup.
0x04 Load the application upon invocation of a command.
0x08 Load the application upon request by the user or another
application.
0x10 Do not load the application.
The RegistryPathWhereLoaderIsSpecified value must identify the registry
path for the application’s own section of the registry.
The ObjectARX API includes the acrxRegisterApp() function, which may be
used in an ObjectARX application to enter information about the application
into the AutoCAD section of the system registry. Typically,
acrxRegisterApp() would enter this information the first time the application
is loaded, and confirm the presence of that information on subsequent
loads.

tigerhsiao

Please refer following statement, autorun to load arx file when Autocad begin starting.

Creating AutoCAD Subkeys and Values
The ObjectARX application’s installation program must be designed to manage
a set of keys and values for that application within the section of system
registry for each version of AutoCAD with which it is intended to run. The
following example shows the layout of the keys and values in the section of
the registry that must be created and maintained for the application:
\\HKEY_LOCAL_MACHINE\SOFTWARE\Autodesk\AutoCAD\releaseNum\
ACAD-1:LocaleID\
Applications\
ApplicationName\
LoadCtrls:REG_DWORD:acrxAppLoadReason
RegPath:REG_SZ:RegistryPathWhereLoaderIsSpecified
The releaseNum and ACAD-1:LocaleID keys are created by the AutoCAD
installation program.
The ApplicationName key must be the logical name of the application, which
is used internally by AutoCAD to identify the program.
The acrxAppLoadReason value defines the conditions under which the application
will be loaded, using one or more logical ORs of the following hex
values listed with their associated meanings:
0x01 Load the application upon detection of proxy object.
0x02 Load the application upon AutoCAD startup.
0x04 Load the application upon invocation of a command.
0x08 Load the application upon request by the user or another
application.
0x10 Do not load the application.
The RegistryPathWhereLoaderIsSpecified value must identify the registry
path for the application’s own section of the registry.
The ObjectARX API includes the acrxRegisterApp() function, which may be
used in an ObjectARX application to enter information about the application
into the AutoCAD section of the system registry. Typically,
acrxRegisterApp() would enter this information the first time the application
is loaded, and confirm the presence of that information on subsequent
loads.

yoursmile

同志们，我觉得都用中文好不！

alim

从别处找来的：

注册表键值"LoADCTRLS"控制说明，控制ARX程序的加载方式(上例中使用的是Ox02随CAD启动一起加载)

0x01：Load the application upon detection of proxy object.
　　　当代理对像被控知时另载相应ARX程序.

0x02：Load the application upon AutoCAD startup.
　　　当AutoCAD启动时加载相应ARX程序.

0x04：Load the application upon invocation of a command.
　　　当输入命令时加载相应ARX程序.

0x08：Load the application upon request by the user or another application.
　　　当有用户或别的程序请求时加载相应ARX程序.

0x10：Do not load the application.
　　　从不加载该应用程序.

0x20：Load the application transparently.
　　　显式加载该应该程序.(不知该项译法是否有误)