获取块的XCLIP边界

LoveArx

Get the XCLIPped boundary of BlockReferences


Solution
The boundary data is stored in an AcDbSpatialFilter object which in turn is stored in an entry name 'SPATIAL' in the extension dictionary 'ACAD_FILTER' of the XCLIPped block reference. More specifically, AcDbSpatialFilter::getDefinition() does the trick. Please bear one point in mind though. That is, it returns the points list of the XCLIPped boundary with the same coordinate system as the block definition. We need to transform those points by the block definition transform matrix manually. Refer to the ObjectARX Reference Guide for description of AcDbSpatialFilter::getClipSpaceToWCSMatrix() and AcDbSpatialFilter::getOriginalInverseBlockXform(). The full code is appended as follows:

  // Draw a red polyline by the given points etc.
  //--------------------------------------------------

  static BOOL drawAPlineWithPropertiesFromBlockRef(AcGePoint2dArray pts,

                 AcDbBlockReference* ref, double elevation, AcGeVector3d& normal)

  {

    AcDbPolyline *pl = new AcDbPolyline;

    AcDbObjectId owner;



    pl->setDatabaseDefaults();

    pl->setClosed(Adesk::kTrue);

    pl->setThickness(0.0);



    if (ref != NULL) {

        owner=ref->ownerId();

        pl->setPropertiesFrom(ref);

    }



    pl->setNormal(normal);



    for (int i=0; i < pts.length(); i++)

    {

        pl->addVertexAt(i, pts);

    }



    pl->setElevation(elevation);

    pl->setColorIndex(1); // Red



    AcDbBlockTableRecord *rec=NULL;

    acdbOpenObject(rec, owner, AcDb::kForWrite);

    if (rec != NULL)

    {

        AcDbObjectId id;

        rec->appendAcDbEntity(id, pl);

        pl->close();

        rec->close();

    }

    else

    {

        delete pl;

        return false;

    }

    return true;

  } // End of drawAPlineWithPropertiesFromBlockRef()





  // Get the boundary from a Block Reference given by the blk parameter.
  // Transform that boundary to the WCS.
  //-------------------------------------------------------------------
  static BOOL GetBlockClippingPolyline(ads_name blk)

  {

    BOOL ret = FALSE;

    AcDbBlockReference *ref = NULL;

    AcDbObjectId insId = AcDbObjectId::kNull;

    acdbGetObjectId(insId, blk);

    if (acdbOpenObject(ref, insId, AcDb::kForRead) != Acad::eOk)

      return ret;



    // Find the clipping object (AcDbSpatialFilter) in the ExtDict of the BlockRef

    AcDbObjectId extDicId = ref->extensionDictionary();

    if( extDicId == AcDbObjectId::kNull )

      return ret;

    AcDbDictionary *extDict=NULL, *acadFilterDict=NULL;

    if (acdbOpenObject(extDict, extDicId, AcDb::kForRead) != Acad::eOk)

        return ret;

    Acad::ErrorStatus err = extDict->getAt(_T("ACAD_FILTER"), (AcDbObject*&)acadFilterDict, AcDb::kForRead);

    extDict->close();

    if( err != Acad::eOk )

        return ret;

    AcDbSpatialFilter *filter=NULL;

    err = acadFilterDict->getAt(_T("SPATIAL"), (AcDbObject*&)filter, AcDb::kForRead);

    acadFilterDict->close();

    if ( err != Acad::eOk)

      return ret;



    // Get the transform matrix stored in the XClip boundary

    AcGeMatrix3d xformInBoundary = filter->getClipSpaceToWCSMatrix( xformInBoundary );

    // and the transform of the BlockRef at the time when the Filter was set

    AcGeMatrix3d xformRefOrig = filter->getOriginalInverseBlockXform( xformRefOrig );



    // Get the transform matrix that the current BlockRef has, so, we can find the difference

    //   with the xformRefOrig

    AcGeMatrix3d refMatrix = ref->blockTransform();

    refMatrix = refMatrix.postMultBy(xformRefOrig );



    // Calculate the final transform matrix which applies to the points

    // returned from filter->getDefinition().

    AcGeMatrix3d finalMatrix = refMatrix.postMultBy(xformInBoundary);



    AcGePoint2dArray pts;

    AcGePoint3dArray pts3d;



    AcGeVector3d normal;

    double elevation = 0, frontClip = 0, backClip = 0;

    Adesk::Boolean enabled  = false;



    // Get all boundary points

    if (filter->getDefinition(pts, normal, elevation, frontClip, backClip, enabled) == Acad::eOk)

    {

      // Rectanglar boundary

      if (pts.length() == 2)

      {

        AcGePoint2d p1(pts[1].x, pts[0].y);

        AcGePoint2d p3(pts[0].x, pts[1].y);

        pts.insertAt(1, p1);

        pts.insertAt(3, p3);

      }



      // Transform all points with the transform matrix we calculated

      for(int i=0; i<pts.length(); i++)

      {

        AcGePoint2d pt2d;

        AcGePoint3d pt3d;

        pt2d = pts;

        pt3d[0] = pt2d[0]; pt3d[1] = pt2d[1]; pt3d[2] = 0;

        pt3d.transformBy(finalMatrix);

        pts3d.append(pt3d);

      }

    }



    // Get the new normal and new ECS information for the polyline.

    AcGeVector3d xfnorm = normal.transformBy(finalMatrix);

    AcGeMatrix3d plineECS;



    AcDbPolyline* pline = new AcDbPolyline();

    pline->setNormal(xfnorm);

    pline->getEcs(plineECS);

    delete pline; pline = NULL;

    AcGeMatrix3d plineECSInv = plineECS.inverse();



    double xfelev = 0.0;

    for (int i = 0; i < pts.length(); i++)

    {

      pts.x = pts3d.x;

      pts.y = pts3d.y;



      if (i == 0)

        xfelev = pts3d.z;



      // Should be identical to within roundoff

      assert(fabs(xfelev - pts3d.z) < 1.0e-10);

    }



    // Show the boundary

    drawAPlineWithPropertiesFromBlockRef(pts, ref, xfelev, xfnorm);



    filter->close();

    ref->close();



    return true;

  } // End of GetBlockClippingPolyline()

游客，如果您要查看本帖隐藏内容请回复

zjy2999

学习！！！！！！

819534890

学习学习学习学习学

GFspringwillow

努力学习代码

URD911

收藏备用 谢过了

aeo

回的人少，我来小顶一下

edata

啥也不说了，感谢楼主分享哇！

炫翔

看看思路，谢谢分享

ymd

学习学习学习学习学

wangqxd

我也来学习学习是怎么回事

xiaopohai69

000000
000000000000000000000000000000000000000000000000000000000000000000

ShaoRui

学习学习学习学习学

xinxirong

http://bbs.mydigit.cn/thread.php?fid=137&search=all#tabA

wssczxf

学习学习学习学习

ARX2014

我来看看是怎么回事呢？